series AM3TW-RVZ 3 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r13.a 1 of 3 north america only features: models single output models dual output model input voltage (v) output voltage (v) output current max (ma) capacitive load, max ( f) efficiency (%) am3tw-2405d-rvz 9-36 5 300 1000 70 am3tw-2409d-rvz 9-36 9 167 220 72 am3tw-2412d-rvz 9-36 12 125 220 74 am3tw-2415d-rvz 9-36 15 100 220 74 am3tw-2424d-rvz 9-36 24 63 100 73 am3tw-4805d-rvz 18-72 5 300 1000 73 am3tw-4809d-rvz 18-72 9 167 220 75 am3tw-4812d-rvz 18-72 12 125 220 78 am3tw-4815d-rvz 18-72 15 100 220 78 am3tw-4824d-rvz 18-72 24 63 100 76 input specifications parameters nominal typical maximum units voltage range 24 9-36 vdc 48 18-72 filter ? isolation specifications parameters conditions typical rated units tested i/o voltage 3 sec 1500 vdc resistance > 1000 mohm capacitance 60 pf ? wide input range (4:1) ? ? 24 pin dip package ? ? metal package ? ? high efficiency up to 79% ? model input voltage (v) output voltage (v) output current max (ma) capacitive load, max ( f) efficiency (%) am3tw-2405s-rvz 9-36 5 600 2200 70 am3tw-2409s-rvz 9-36 9 333 470 72 am3tw-2412s-rvz 9-36 12 250 470 75 am3tw-2415s-rvz 9-36 15 200 470 75 am3tw-2424s-rvz 9-36 24 125 220 74 am3tw-4805s-rvz 18-72 5 600 2200 75 am3tw-4809s-rvz 18-72 9 333 470 77 am3tw-4812s-rvz 18-72 12 250 470 79 am3tw-4815s-rvz 18-72 15 200 470 79 am3tw-4824s-rvz 18-72 24 125 220 76
series AM3TW-RVZ 3 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r13.a 2 of 3 north america only output specifications parameters conditions typical maximum units voltage accuracy 1 % short circuit protection continuous short circuit restar t auto recovery line voltage regulation 0.5 % load voltage regulation 0.5 % temperature coefficient 0.02 %/ o c ripple & noise at 20mhz bandwidth 60 mv p-p voltage balance balanced load 1 % general specifications parameters conditions typical maximum units switching frequency 100% load 100-400 khz operating temperature full load (see derating chart) -40 to +85 o c storage temperature -40 to +125 o c max case temperature 100 o c cooling free air convection humidity 95 % case material nickel coated copper weight 15 g dimensions(l x w x h) tolerance 0.5 mm or 0.02 inches 1.25 x 0.8 x 0.4 inches 31.75 x 20.32 x 10.16 mm mtbf >2,200,000 hrs (mil-hdbk - 217f, ground benign, t=+25 o c) safety specifications parameters standards designed to meet iec 60950-1 note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. pin out specifications pin 1500 vdc single dual 2 -v input -v input 3 -v input -v input 9 no pin common 11 n.c. -v output 14 +v output +v output 16 -v output common 22 +v input +v input 23 +v input +v input
series AM3TW-RVZ 3 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r13.a 3 of 3 north america only dimensions 20.32 (0.80) 10.16 (0.40) 3.05 (0.12) 15.24 (0.60) derating 0 25 75 50 85 100 80 60 40 20 0 85 o c safe operating area free air convection ambient temperature o c 100 -40 output power % note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency cert ifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an am bient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards ot her the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s st andard terms of sale available at www.aimtec.com.
|
